【英文标准名称】:StandardTestMethodfortheAnalysisofRefrigerant114,PlusOtherCarbon-ContainingandFluorine-ContainingCompoundsinUraniumHexafluorideviaFourier-TransformInfrared(FTIR)Spectroscopy
【原文标准名称】:用傅里叶转换红外(FTIR)光谱法分析六氟化铀中制冷剂114加上其它含碳和含氟化合物的标准试验方法
【标准号】:ASTMC1441-2004
【标准状态】:现行
【国别】:美国
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:烃类;试验方法;傅里叶;光谱学;六氟化铀;制冷剂;红外线光谱法;碳;氟;化合物
【英文主题词】:refrigerants;testmethods;compounds;spectroscopy;uraniumhexafluoride;infraredspectroscopy;fluorine;fourier;hydrocarbons;carbon
【摘要】:
【中国标准分类号】:F46
【国际标准分类号】:27_120_30
【页数】:7P;A4
【正文语种】:英语
基本信息
| 标准名称： | 国境口岸储存场地卫生监督规程 |
| 英文名称： | Codes of sanitary supervision for storage field at frontier port |
| 中标分类： |
医药、卫生、劳动保护 >>
卫生 >>
卫生检疫 |
| 替代情况： | 被SN/T 1318-2009代替 |
| 发布日期： | 2003-08-18 |
| 实施日期： | 2004-02-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 2010-01-16 |
| 起草单位： | 国家认证认可监督管理委员会 |
| 出版日期： | 1900-01-01 |
| 页数： | 平装16开， 页数：6， 字数：8000 |
适用范围
本标准规定了国境口岸储存场地卫生监督的要求、程序、结果判定及处置。本标准适用于国境口岸储存场地的卫生监督。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 医药 卫生 劳动保护 卫生 卫生检疫
Product Code:SAE AMS4163
Title:Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for structural parts requiring high strength up to 500 degrees F (260 degrees C) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication.Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Rationale: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for structural parts requiring high strength up to 500 degrees F (260 degrees C) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication.Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.