您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/Z 19963-2005 风电场接入电力系统技术规定

时间:2024-05-14 15:43:16 来源: 标准资料网 作者:标准资料网 阅读:9629
下载地址: 点击此处下载
基本信息
标准名称:风电场接入电力系统技术规定
英文名称:Technical rule for connecting wind farm to power network
中标分类: 机械 >> 活塞式内燃机与其他动力设备 >> 内燃机与附属装置
ICS分类: 能源和热传导工程 >> 风力发电系统和其
替代情况:被GB/T 19963-2011代替
发布部门:中华人民共和国国家质量监督检验检疫总局 中国家标准化管理委员会
发布日期:2005-12-12
实施日期:2006-07-01
首发日期:2005-12-13
作废日期:2012-06-01
主管部门:中国电力企业联合会
提出单位:中国电力企业联合会
归口单位:中国电力企业联合会
起草单位:中国电力科学研究院、国家电力调度通信中心
起草人:王伟胜、赵海翔、戴慧珠
出版社:中国标准出版社
出版日期:2006-07-01
页数:16开, 页数:8, 字数:11千字
计划单号:20050996-T-524
适用范围

本指导性技术文件规定了风电场接人电力系统的技术要求。本指导性技术文件适用于通过电压等级66 KV及以上输电线路与输电网连接的新建或扩建风电常对于通过配电线路接人配电网的风电场,也可参照本指导性技术文件。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本指导性技术文件的引用而成为本指导性技术文件的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本指导性技术文件,但鼓励根据本指导性技术文件达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本指导性技术文件。
GB/T2900.53-2001电Z术语风力发电机组(idtIEC60050-415;1999)
GB/T12325-2003电能质量供电电压允许偏差
GB12326-2000电能质量电压波动和闪变
GB/T14549-1993电能质量公用电网谐波
GB/T15945-1995电能质量电力系统频率允许偏差
DL755-2001电力系统安全稳定导则
SD325-1989电力系统电压和无功技术导则
IEC61400-21WindTurbineGeneratorSystemsPart21;Measurementandassessmentofpowerqualitycharacteristicsofgridconnectedwindturbines(风力发电机组电能质量测量和评估方法)

所属分类: 机械 活塞式内燃机与其他动力设备 内燃机与附属装置 能源和热传导工程 风力发电系统和其
基本信息
标准名称:摆线针轮行星传动 第3部分:几何要素代号
英文名称:Cycloidal drives ― Part 3: Symbols of geometrical data
中标分类: 机械 >> 通用零部件 >> 联轴器、制动器与变速器
替代情况:替代GB/T 10107.3-1988
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2012-09-03
实施日期:2013-03-01
首发日期:1988-12-10
作废日期:
主管部门:中国机械工业联合会
归口单位:中国机械工业联合会
起草单位:河北工业大学、天津市石化通用机械研究所、天津市减速机总厂有限公司、上海减速机械厂有限公司等
出版社:中国标准出版社
出版日期:2013-03-01
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用零部件 联轴器 制动器与变速器
Product Code:SAE ARP1109
Title:Dynamic Testing Systems for Oxygen Breathing Equipment
Issuing Committee:A-10 Aircraft Oxygen Equipment Committee
Scope:This SAE Aerospace Recommended Practice (ARP) recommends performance requirements for test equipment used in dynamic testing of aviation oxygen breathing equipment. This document describes test equipment and methods used for testing continuous flow, demand and pressure demand regulators and their associated masks as well as filtered protective breathing devices; such articles of oxygen breathing or protective breathing equipment may be tested as individual components or as a complete system. This recommended practice covers but is not limited to the following types and classes of systems: Type I - mechanical breathing simulator (either bellows or piston type) only generating sinusoidal patterns; Type II - mechanical breathing simulator (generally cam-actuated, bellows or piston type or pre-programmed, servocontrolled) generating any shape of breathing pattern; and Type III - pneumatic breathing simulator pre-programmed, servocontrolled generating any shape of breathing pattern; Class A - military aircraft oxygen systems; and Class B - transport category and general aviation oxygen systems.